|
Note:
|
A colon in a commnand means "start depositing data from
the most recently deposited location, or if none, then from
the most recently opened one.
|
|
11.
|
Examining a block, then depositing into it.
USER TYPES/ 30.35 (RET)
MONITOR TYPES/
0030: A0 A1 A2 A3 A4 A5 A6
USER TYPES/
:50 b B1 b B2 b B3 b B4 b B5 (RET)
|
|
Note:
|
New data deposited beginning at most recently opened location (30)
|
|
12.
|
Run a program at a specified address.
USER TYPES/ 10F0 R (RET)
MONITOR TYPES/ 10F0: A9 (contents)
|
|
Note:
|
The cursor is left immediately to the right of
the "A9"; it is not returned to the next tine.
|
|
13.
|
Run at the most recently examined location.
USER TYPES/ 10F0 (RET)
MONITOR TYPES/ 10F0: A9
USER TYPES/ R (RET)
0052: 02
0056: 06
|
|
14.
|
Enter a program into mernory and run it in one line.
USER TYPES/
40: A9 b 0 b 20 b EF 10 EF b 38 b 69 b 0 b 4C b 40 b 0 R (RET)
MONITCR TYPES/
40: FF (prior contents of 40)
|
|
|
|
|
MONITCR TYPES/
40: FF (prior contents of 40)
|
|
15.
|
An "on line" error correction.
USER TYPES/
44: Al B A2 b A3A4A5A6 b A7 (data A6 will be loaded in location 42)
USER TYPES/
40506070: AA (data AA will be loaded in location 6070)
|
|
16.
|
Useful routines in monitor which can be accessed by user programs
GETLINE: location FF1F:
monitor entry point (jumping to FF1F will enter
monitor and echo carriage return. You can then
examine memory locations with the monitor.)
ECHO: location FFEF:
prints one byte (ASCII) (data from "A"
(accumulator), contents of "A" not disturbed.
Example:
20 b EF 10FF (JRS ECHO)).
PRBYTE: location PFDC:
prints one byte (HEX) (data from "A".
contents of "A" disturbed, )
PRHEX: location PFES:
prints one hex digit (data from four
least significant bits of "A" contents of
"A" disturbed.)
|
|
